Reinitialize your Smith Corona typewriter to reset it if you are experiencing problems with the cartridge. This step is vital if you have just replaced the correction tape, daisy-wheel or ribbon cartridge. Reinitializing the typewriter prompts the settings to work with the new consumable. It is also a good idea to verify that the ribbon cartridge is installed correctly. If it is not, the Smith Corona will not print characters accurately or even at all. These two areas are sound places to start your troubleshooting.
Instructions
1. Press the "Code" and "=" keys together to reinitialize the typewriter. The carrier position and stored memories will not be affected. If the ribbon cartridge cassette works, stop here; otherwise, go to the next step.
2. Reinstall the ribbon cassette cartridge or replace it with a new one. Open the cover to the printer.
3. Press the "Space" or "BS" (Backspace) key to move the print carrier to the center of the platen.
4. Grasp the ribbon cassette cartridge using the both hands to hold each exposed side and lift it up and out of the front.
5. Insert the back end of the ribbon cassette cartridge inside the typewriter first, then push the remainder of the cartridge in.
6. Press it down gently until you hear a click to indicate it is locked into place.
7. Rotate the ribbon feed knob counter-clockwise just enough to make sure the ribbon is not loose inside the cassette.
8. Push the "Code" + "=" keys together.
9. Close the typewriter cover.
Tags: cassette cartridge, ribbon cartridge, ribbon cassette, ribbon cassette cartridge, Smith Corona